Reduction of the Probability of Occurrence of Differential Pressure Sticking Through the Use of Diesel on Water Based Drilling Fluids

Authors

  • David Esteban Almeida Campana Petroamazonas EP
  • Marco Loaiza Escuela Politécnica Nacional
  • Raul Valencia Escuela Politécnica Nacional

DOI:

https://doi.org/10.29019/enfoqueute.v10n1.366

Keywords:

differential sticking, diesel, bow tie, risk

Abstract

The drilling campaign on Pad C of the Tiputini Field, located on the Oriente Basin, Ecuador, started with the first exploratory well TPTC-002. Pressure tests performed on the M1 sandstone of the Napo Formation determined that the average reservoir pressure (Pr) was 1921 psi. Ten months later, Pr averaged 846 psi. This increased the risk of differential pressure sticking, event that indeed occurred while drilling the well TPTC-016. By using the “Bow-Tie” methodology as a predictive tool to analyze risks, and taking into account the preliminary studies that describe this phenomena, a solution was found for stablishing an additional barrier with the use of diesel on the water-based drilling fluid. Diesel was used in order to extend the ‘half value time’ and to decrease the friction coefficient between the mud cake and pipe.

Metrics

Downloads

Download data is not yet available.

References

Annis, M. R., y Monaghan, P. H. (1962). Differential Pressure Sticking-Laboratory Studies of Friction Between Steel and Mud Filter Cake. Society of Petroleum Engineers. doi:10.2118/151-PA.
API RP 13B-1. (2009). Recommended Practice for Field Testing Water-based Drilling Fluids. 4th Edition. API.
De Dianous, V., y Fiévez, C. (2006). ARAMIS project: A more explicit demonstration of risk control through the use of bow–tie diagrams and the evaluation of safety barrier performance. Journal of Hazardous Materials, 130 (3), 220-233.
Ferguson, C. K., y Klotz, J. A. (1954, February 1). Filtration From Mud During Drilling. Society of Petroleum Engineers. doi:10.2118/289-G
Holt, C. A., y Falmy, H. (1997). The Successful Application of Diesel as Horizontal Drilling Fluid. Society of Petroleum Engineers. doi:10.2118/39283-MS
Khakzad, N., Khan, F., y Amyotte, P. (2012). Dynamic risk analysis using bow-tie approach. Reliability Engineering y System Safety, 104, 36-44.
Lewis, S., y Smith, K. (2010). Lessons learned from real world application of the bow-tie method. In Pre-pared for Presentation at American Institute of Chemical Engineers-6th Global Congress on Process Safety San Antonio.
Lledó, P., y Rivarola, G. (2007). Gestión de proyectos. Pearson Educación.
Outmans, H. D. (1958). Mechanics of Differential Pressure Sticking of Drill Collars. Society of Petroleum Engineers.
Petroamazonas EP, (2016a). Plan de Desarrollo Bloque 43-Ishpingo, Tiputini, Tambococha-ITT, unpublished, Petroamazonas EP, Ecuador.
Petroamazonas EP, (2016b). Presión de reservorio M1 en la plataforma Tiputini C [database], unpublished, Petroamazonas EP, Ecuador.
Petroamazonas EP, (2016c). Reporte final de Perforación- Pozo Tiputini C-016, unpublished, Petroamazonas EP, Ecuador.
Petroamazonas EP, (2016d). Programa de Perforación- Pozo Tiputini C-017, unpublished, Petroamazonas EP, Ecuador.
Petroamazonas EP, (2016e). Reporte final de Perforación- Pozo Tiputini C-018, unpublished, Petroamazonas EP, Ecuador.
Shahriar, A., Sadiq, R., y Tesfamariam, S. (2012). Risk analysis for oil & gas pipelines: A sustainability assessment approach using fuzzy based bow-tie analysis. Journal of Loss Prevention in the Process Industries, 25 (3), 505-523.

Published

2019-03-29

How to Cite

Almeida Campana, D. E., Loaiza, M., & Valencia, R. (2019). Reduction of the Probability of Occurrence of Differential Pressure Sticking Through the Use of Diesel on Water Based Drilling Fluids. Enfoque UTE, 10(1), pp. 77 - 88. https://doi.org/10.29019/enfoqueute.v10n1.366

Issue

Section

Miscellaneous