Powder Detergent Packaging Line Improvement by Lean Six Sigma DMAIC Methodology

Authors

DOI:

https://doi.org/10.29019/enfoqueute.996

Keywords:

Lean Six Sigma DMAIC, Productivity, Quality Tools, Poka-Yoke, SMED

Abstract

This investigation was a case of study in the powder detergent packaging line and aimed to reduce all those wastes that do not add value to the product, increasing the cost of production. Reducing or eliminating waste within the manufacturing industry becomes necessary for sustainable businesses over time and keeps generating development. To achieve it, the Lean Six Sigma DMAIC methodology was implemented in a detergent powder packaging line, to identify the problems that afflicted and made production more expensive. By using quality tools (such as Pareto and Ishikawa diagrams, 5S application, Poka-Yokes, SMED, training personnel, and standardizing processes) it was possible to reduce unproductive times. Energy consumption was reduced by up to 20 %, also efficiency and machine availability increased by 10.98 % and 7.32 %, respectively. The general performance of the line increased by 15.16 %, which translates into significant monthly savings of USD 71 442.05. By applying these improvement techniques, the most significant efficiency was registered in 1 kg packages, going from 47 % to 89 %, approximately. To maintain this productivity and even to perfect it, it is necessary to hire specialized personnel who know the production processes and industrial operations.

Downloads

Download data is not yet available.

References

S. Krishna Priya, V. Jayakumar, and S. Suresh Kumar. “Defect Analysis and Lean Six Sigma Implementation Experience in an Automotive Assembly Line,” Materials Today: Proceedings, vol. 22, pp. 948-958, 2020. Available: 10.1016/j.matpr.2019.11.139.

C. Castro, Z. Castañeda, K. R. Ruiz, G. González, and G. Poveda. “El sector florícola ecuatoriano y su afectación en el mercado internacional producto de la pandemia causada por el Covid-19,” in Congreso Internacional Virtual Sobre Covid-19. Consecuencias Psicológicas, Sociales, Políticas Y Económicas, 2020, pp. 53-65.

L. Villar-Zamora. “Uso de sistemas expertos en el ciclo de carguío y acarreo y su influencia en el proceso de mejora continua y gestión de costos operativos,” 2020.

O. M. Ikumapayi, E. T. Akinlabi, F. M. Mwema, and O. S. Ogbonna. “Six Sigma Versus Lean Manufacturing – An Overview,” Materials Today: Proceedings, vol. 26, pp. 3275-3281, 2020. Available: 10.1016/j.matpr.2020.02.986.

D. Skalli, A. Charkaoui, and A. Cherrafi. “Assessing Interactions Between Lean Six-Sigma, Circular Economy and Industry 4.0: Toward an Integrated Perspective,” IFAC-Papers OnLine, vol. 55, no. 10, pp. 3112-3117, 2022. Available: 10.1016/j.ifacol.2022.10.207.

A. U. Abhijit and S. Pillai, “Sustainable Practises in Lean Manufacturing: A Critical Review,” International Journal of Management Studies, vol. 5, no. 1-2, pp. 1-12, 2018.

A. Jamwal, S. Nayim, R. K. Shukla, R. Agrawal, and S. Gupta. “Assessment of Barriers in Lead Time Improvement: An Exploratory Study of Electronics Manufacturing Companies in Himachal Pradesh (India),” International Journal of Business and Systems Research, vol. 15, no. 2, pp. 182-199, 2021.

D. H. Stamatis. Six Sigma and Beyond: Design for Six Sigma, Volume VI. CRC Press, 2002.

P. Guleria, A. Pathania, R. K. Shukla, and S. Sharma. “Lean Six-Sigma: Panacea to Reduce Rejection in Gear Manufacturing Industry,” Materials Today: Proceedings, vol. 46, pp. 4040-4046, 2021. Available: 10.1016/j.matpr.2021.02.559.

M. Smętkowska and B. Mrugalska. “Using Six Sigma DMAIC to Improve the Quality of the Production Process: A Case Study,” Procedia - Social and Behavioral Sciences, vol. 238, pp. 590–596, 2018. Available: 10.1016/j.sbspro.2018.04.039.

R. Edwin-Joseph, N. Kanya, K. Bhaska, J.Francis Xavier, S. Sendilvelan, M. Prabhahar, N. Kanimozhi, S. Geetha. “Analysis on Productivity Improvement, Using Lean Manufacturing Concept,” Materials Today: Proceedings, vol. 45, pp. 7176-7182, Jan. 2021. Available: 10.1016/J.MATPR.2021.02.412.

N. Nandakumar, P. G. Saleeshya, and P. Harikumar. “Bottleneck Identification and Process Improvement by Lean Six Sigma DMAIC Methodology,” Materials Today: Proceedings, vol. 24, pp. 1217-1224, 2020. Available: 10.1016/j.matpr.2020.04.436.

T. A. Saurin, J. L. D. Ribeiro, and G. Vidor, “A Framework for Assessing Poka-Yoke Devices,” Journal of Manufacturing Systems, vol. 31, no. 3, pp. 358-366, 2012. Available: 10.1016/j.jmsy.2012.04.001.

G. Toki, T. Ahmed, M. Hossain, R. Khan-Alave, M. Omar-Faruk, R. Mia, S. Rashedul-Islam. “Single Minute Exchange Die (SMED): A Sustainable and Well-Timed Approach for Bangladeshi Garments Industry,” Cleaner Engineering and Technology, vol. 12, p. 100592, 2023. Available: 10.1016/j.clet.2022.100592.

K. M. Senthil Kumar, K. Akila, K. K. Arun, S. Prabhu, and C. Selvakumar. “Implementation of 5S Practices in a Small Scale Manufacturing Industries,” Materials Today: Proceedings, vol. 62, pp. 1913-1916, 2022. Available: 10.1016/j.matpr.2022.01.402.

P. Guleria, A. Pathania, H. Bhatti, K. Rojhe, and D. Mahto. “Leveraging Lean Six Sigma: Reducing Defects and Rejections in Filter Manufacturing Industry,” Materials Today: Proceedings, vol. 46, pp. 8532-8539, 2021. Available: 10.1016/j.matpr.2021.03.535.

S. N. Dinesh, M. Shalini, M. Vijay, R. C. Vijey Mohan, R. Saminathan, and R. Subbiah. “Improving the Productivity in Carton Manufacturing Industry Using Value Stream Mapping (VSM),” Materials Today: Proceedings, vol. 66, pp. 1221-1227, 2022. Available: 10.1016/j.matpr.2022.05.015.

M. Kharub, B. Ruchitha, S. Hariharan, and N. Shanmukha Vamsi, “Profit enhancement for small, medium scale enterprises using Lean Six Sigma,” Mater Today Proc, vol. 56, pp. 2591-2595, 2022, doi: 10.1016/j.matpr.2021.09.159.

K. Antosz, M. Jasiulewicz-Kaczmarek, R. Waszkowski, and J. Machado. “Application of Lean Six Sigma for Sustainable Maintenance: Case Study,” IFAC-PapersOnLine, vol. 55, no. 19, pp. 181-186, 2022. Available: 10.1016/j.ifacol.2022.09.204.

P. Thakur, R. Kumar, S. Kumar, A. Pathania, and B. Goel. “Analysis and Optimization of Properties of Paint Materials for Reduction of Paint Defects in Agro Products,” Materials Today: Proceedings, vol. 45, pp. 5617–5623, 2021. Available: 10.1016/j.matpr.2021.02.349.

I. Daniyan, A. Adeodu, K. Mpofu, R. Maladzhi, and M. G. Kana-Kana Katumba, “Application of Lean Six Sigma Methodology Using DMAIC Approach for the Improvement of Bogie Assembly Process in the Railcar Industry,” Heliyon, vol. 8, no. 3, p. e09043, 2022. Available: 10.1016/j.heliyon.2022.e09043.

N. O. Erdil, C. B. Aktas, and O. M. Arani. “Embedding Sustainability in Lean Six Sigma Efforts,” Journal of Cleaner Production, vol. 198, pp. 520–529, 2018. Available: 10.1016/j.jclepro.2018.07.048.

C. L. Vásquez Stanescu, A. G. Carillo Ozal, M. E. Tona Castillo, M. V. Galíndez Jimenez, K. A. Macias Camacaro, and C. Esposito de Díaz. “Sistema de gestión energética y ambiental de productos Alimex CA,” Suma de Negocios, vol. 8, no. 18, pp. 115-121, 2017. Available: 10.1016/j.sumneg.2017.11.003.

V. Mercado and J. B. Peña. “Modelo de gestión de mantenimiento enfocado en la eficiencia y optimización de la energía eléctrica,” Saber, vol. 28. scielo, pp. 99-105, 2016.

E. Guitérrez and I. Trejo. “Efecto del cambio climático en la distribución potencial de cinco especies arbóreas de bosque templado en México,” Revista Mexicana de Biodiversidad, vol. 85, no. 1, pp. 179-188, 2014. Available: 10.7550/rmb.37737.

S. A. R. Shah, Q. Zhang, J. Abbas, H. Tang, and K. I. Al-Sulaiti. “Waste Management, Quality of Life and Natural Resources Utilization Matter for Renewable Electricity Generation: The Main and Moderate Role of Environmental Policy,” Utilities Policy, vol. 82, p. 101584, Jun. 2023. Available: 10.1016/J.JUP.2023.101584.

S. Stefanie, S. Christoph, and S. Michael. “Identifying Energy Flexible Manufacturing Layouts in a Light Metal Foundry,” Procedia CIRP, vol. 104, pp. 1589-1594, 2021, Available: 10.1016/J.PROCIR.2021.11.268.

A. Aranda-Usón, G. Ferreira, M. D. Mainar-Toledo, S. Scarpellini, and E. Llera Sastresa. “Energy Consumption Analysis of Spanish Food and Drink, Textile, Chemical and Non-Metallic Mineral Products Sectors,” Energy, vol. 42, no. 1, pp. 477-485, 2012. Available: 10.1016/j.energy.2012.03.021.

T. Dunn. “8 - OEE Effectiveness,” in Flexible Packaging. Oxford: William Andrew Publishing, 2015, pp. 77-85. Available: 10.1016/B978-0-323-26436-5.00008-4.

P. J. López Abad. Cambia la energía, cambia el clima. Cambio climático y su impacto en el sector energético. 2016. Available: 10.13140/RG.2.2.10284.62085.

Downloads

Published

2024-01-01

How to Cite

Pushug, J., Ramírez, L., Simbaña, I., & Saquinga, D. (2024). Powder Detergent Packaging Line Improvement by Lean Six Sigma DMAIC Methodology. Enfoque UTE, 15(1), 28–35. https://doi.org/10.29019/enfoqueute.996

Issue

Vol. 15 No. 1 (2024)

Section

Miscellaneous

License

Copyright (c) 2023 The Authors

Creative Commons License

This work is licensed under a Creative Commons Attribution 3.0 Unported License.

The articles and research published by the UTE University are carried out under the Open Access regime in electronic format.  This means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. By submitting an article to any of the scientific journals of the UTE University, the author or authors accept these conditions.

The UTE applies the Creative Commons Attribution (CC-BY) license to articles in its scientific journals. Under this open access license, as an author you agree that anyone may reuse your article in whole or in part for any purpose, free of charge, including commercial purposes. Anyone can copy, distribute or reuse the content as long as the author and original source are correctly cited. This facilitates freedom of reuse and also ensures that content can be extracted without barriers for research needs.

 

This work is licensed under a Creative Commons Attribution 3.0 International (CC BY 3.0).

 

The Enfoque UTE journal guarantees and declares that authors always retain all copyrights and full publishing rights without restrictions [© The Author(s)]. Acknowledgment (BY): Any exploitation of the work is allowed, including a commercial purpose, as well as the creation of derivative works, the distribution of which is also allowed without any restriction.