Device for measuring thermal conductivity of composites based on biomass waste

Authors

  • Luis Velasco Roldán Universidad de las Fuerzas Armadas
  • Leonardo Goyos Pérez Universidad de las Fuerzas Armadas
  • Reinaldo Delgado García Universidad de las Fuerzas Armadas
  • Luis Freire Amores Universidad Tecnológica Equinoccial

DOI:

https://doi.org/10.29019/enfoqueute.v7n2.96

Keywords:

thermal conductivity, thermal insulation, vegetable wastethermal conductivity, vegetable waste

Abstract

A standardized test bench has been designed, built and calibrated to determine the thermal conductivity of insulating building materials. The device, simple in design and economical, aims to become a replicable and useful tool for the development of multiple research on innovative materials based on waste or unvalued resources for the production of non-industrial and locally produced cheap thermal insulating materials which lead to the improvement of buildings energy efficiency. The main contribution of the test bench is the possibility of analyzing insulation compounds with more thickness and different formats thanks to the press design, which allows the setting and the pressure of the plates on the samples, holding these in the air and preventing any transmission by unwanted conduction.

Metrics

Downloads

Download data is not yet available.

References

J. Diez Campos, E. García Breijo. I Perez Clemente, J.V. Ros Lis, J. Soto Camino (2007). Determinación experimental de la conductividad. XI Congreso Internacional de Ingeniería de Proyectos.
Lopez, R., Morales, J., Diaz, A., & Lizardi, A. (2000). Equipo para evaluar en forma experimental el coeficiente de conductividad térmica de los materiales de cosntrucción. Revista Mexicana de Física, 47(2), 148–152.
Martínez Fuentes, V. (2004). Sistema primario de medición de conductividad térmica de aislantes térmicos. Etapa 1. Diseño térmico e instrumental. Simposio de Meterorología CENAM
Method, S. T. (2013a). C1114-06. Standard Test Method for Steady-State Thermal Transmission Properties by Means of, 5–12.
Method, S. T. (2013b). C177-13. Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate, 1–23.
Method, S. T. (2013c). C518-10. Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus 1, 1–16.
Method, S. T. (2014). C168-13. Standard Terminology Relating to Thermal Insulation, 1–7.
Milagrosa, M., Sánchez, P., Centeno, R., & Lazcano, F. (2002). Desarrollo de un prototipo para la caracterización térmica de los materiales de construcción regionales. Ingeniería, 2, 13–22.
Rodríguez, F. (2007). Diseño, fabricación y calibración de un dispositivo para la caracterización de las propiedades termofísicas en materiales secos de alta resistencia térmica y baja temperatura de uso. Universidad Autónoma de Barcelona.
J. Diez Campos, E. García Breijo. I Perez Clemente, J.V. Ros Lis, J. Soto Camino (2007). DETERMINACIÓN EXPERIMENTAL DE LA CONDUCTIVIDAD. In XI Congreso Internacional de Ingeniería de Proyectos.
Lopez, R., Morales, J., Diaz, A., & Lizardi, A. (2000). Equipo para evaluar en forma experimental el coeficiente de conductividad térmica de los materiales de cosntrucción. Revista Mexicana de Física, 47(2), 148–152.
Martínez Fuentes, V. (2004). Sistema primario de medición de conductividad térmica de aislantes térmicos. Etapa 1. Diseño térmico e instrumental. Simposio de Meterorología CENAM
Method, S. T. (2013a). C1114-06. Standard Test Method for Steady-State Thermal Transmission Properties by Means of, 5–12.
Method, S. T. (2013b). C177-13. Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate, 1–23.
Method, S. T. (2013c). C518-10. Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus 1, 1–16.
Method, S. T. (2014). C168-13. Standard Terminology Relating to Thermal Insulation, 1–7.
Milagrosa, M., Sánchez, P., Centeno, R., & Lazcano, F. (2002). Desarrollo de un prototipo para la caracterización térmica de los materiales de construcción regionales. Ingeniería, 2, 13–22.
Rodríguez, F. (2007). Diseño, fabricación y calibración de un dispositivo para la caracterización de las propiedades termofísicas en materiales secos de alta resistencia térmica y baja temperatura de uso. Universidad Autónoma de Barcelona.

Published

2016-06-30

How to Cite

Velasco Roldán, L., Goyos Pérez, L., Delgado García, R., & Freire Amores, L. (2016). Device for measuring thermal conductivity of composites based on biomass waste. Enfoque UTE, 7(2), pp. 69 - 81. https://doi.org/10.29019/enfoqueute.v7n2.96

Issue

Section

Miscellaneous