Fenton's reagent minimum dosage for remediation of water contaminated with dyes

Authors

  • Gina Terán Universidad de Las Américas
  • Paola Posligua Universidad de Las Américas
  • Carlos Banchón Universidad de Las Américas

DOI:

https://doi.org/10.29019/enfoqueute.v6n3.70

Keywords:

azoic dyes, oxidation-reduction potential, Pelileo, textile industry

Abstract

Effluents from the textile industry not only represent a latent threat to biodiversity on our planet but also to humans due to the pollution generated by industrial dyes. In this study a Fenton process was evaluated for the decoloration of water contaminated with yellow 160, blue 81 and red 190 with an initial concentration of 3300 mg.L-1 and a chemical oxygen demand of 1719 mg.L-1. Changes in pH and molar doses of ferrous sulfate and hydrogen peroxide were evaluated. The Fenton process allowed 99,9% removal of organic matter and 100% removal of turbidity when it worked at pH 3,5 and molar dose Fe+2/ H2O2 between 1:3 and 1:5. By spectrophotometric scanning and measurement of redox potential, it was shown that the quality of decontaminated water resembled the ultrapure water type I.

Downloads

Download data is not yet available.

Published

2015-09-30

How to Cite

Terán, G., Posligua, P., & Banchón, C. (2015). Fenton’s reagent minimum dosage for remediation of water contaminated with dyes. Enfoque UTE, 6(3), pp. 65 – 80. https://doi.org/10.29019/enfoqueute.v6n3.70

Issue

Section

Miscellaneous