Influence of minimum quantity of lubricant (MQL) on tool life of carbide cutting tools during milling process of steel AISI 1018

Authors

  • Diego Núñez Universidad Técnica de Ambato
  • Byron Núñez Universidad Técnica de Ambato
  • Henry Vaca Universidad Técnica de Ambato
  • Maritza Ureña Universidad Técnica de Ambato

DOI:

https://doi.org/10.29019/enfoqueute.v8n2.157

Keywords:

Cutting fluids, minimum quantity of lubrication, tool life, milling

Abstract

Nowadays, high productivity of machining is an important issue to obtain economic benefits in the industry. This purpose could be reached with high cutting velocity and feed rate. However, the inherently behavior produce high temperatures in the interface of couple cutting tool/workpiece. Many cutting fluids have been developed to control temperature in process and increase tool life. The objective of this paper is to compare the carbide milling tool wear using different systems cutting fluids: flood and minimum quantity of lubrication (MQL). The values of carbide milling cutting tool wear was evaluate according with the standard ISO 8688-1 1989. The experimental results showed that using MQL reduces significantly (about 40%) tool wear in milling AISI 1018 steel at industrial cutting conditions.

Downloads

Download data is not yet available.

References

Attanasio, A., Gelfi, M., Giardini, C., & Remino, C. (2006). Minimal quantity lubrication in turning: Effect on tool wear. Wear, 260(3), 333-338. doi:
http://dx.doi.org/10.1016/j.wear.2005.04.024
Cervantes E. (2014), MQL: Tecnologías de vanguardia de lubricación en la industria metalmecánica, Visión Industrial, Vol. 12, pp. 20-22, Recuperado de:
https://issuu.com/visionindustrial/docs/vision_12_ok/3
Dhar, N. R., Kamruzzaman, M., & Ahmed, M. (2006). Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. Journal of Materials Processing Technology, 172(2), 299-304. doi:
http://dx.doi.org/10.1016/j.jmatprotec.2005.09.022
Dropsa (2016), Continuous and perfect air/oil lubrication Guarantee ted with MiQueL, Catálogo DROPSA. Recuperado de:
http://www.dropsa.com/flex/cm/pages/ServeBLOB.php/L/ES/IDPagina/842
Fox, N. J., & Stachowiak, G. W. (2007). Vegetable oil-based lubricants—A review of oxidation. Tribology International, 40(7), 1035-1046. doi:
http://dx.doi.org/10.1016/j.triboint.2006.10.001
López de Lacalle, L. N., Angulo, C., Lamikiz, A., & Sánchez, J. A. (2006). Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling. Journal of Materials Processing Technology, 172(1), 11-15. doi:
http://dx.doi.org/10.1016/j.jmatprotec.2005.08.014
Morales Y. Zamora Y. Beltrán R. López K. López R. (2016) Desgaste de la herramienta de corte en el torneado en seco del acero AISI 316L. Ecuador, Ingenius, 17, 36-40 doi:
http://dx.doi.org/10.17163/ings.n17.2017.05
Núñez B. (2016) Estudio del efecto del sistema de Mínima Cantidad de Lubricación (MQL) con aceite vegetal en la vida de las herramientas de corte de metal duro en el fresado del acero AISI1018, Universidad Técnica de Ambato
Paturi, U. M. R., Maddu, Y. R., Maruri, R. R., & Narala, S. K. R. (2016). Measurement and Analysis of Surface Roughness in WS2 Solid Lubricant Assisted Minimum Quantity Lubrication (MQL) Turning of Inconel 718. Procedia CIRP, 40, 138-143. doi:
http://dx.doi.org/10.1016/j.procir.2016.01.082
Pereira, O., Rodríguez, A., Fernández-Abia, A. I., Barreiro, J., & López de Lacalle, L. N. (2016). Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304. Journal of Cleaner Production, 139, 440-449. doi:
http://dx.doi.org/10.1016/j.jclepro.2016.08.030
Sharma, A. K., Tiwari, A. K., & Dixit, A. R. (2016). Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. Journal of Cleaner Production, 127, 1-18. doi:
http://dx.doi.org/10.1016/j.jclepro.2016.03.146
Shashidhara, Y. M., & Jayaram, S. R. (2010). Vegetable oils as a potential cutting fluid—An evolution. Tribology International, 43(5–6), 1073-1081. doi:
http://dx.doi.org/10.1016/j.triboint.2009.12.065
Shokrani, A., Dhokia, V., & Newman, S. T. (2012). Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. International Journal of Machine Tools and Manufacture, 57, 83-101. doi:
http://dx.doi.org/10.1016/j.ijmachtools.2012.02.002
Uysal, A., Demiren, F., & Altan, E. (2015). Applying Minimum Quantity Lubrication (MQL) Method on Milling of Martensitic Stainless Steel by Using Nano Mos2 Reinforced Vegetable Cutting Fluid. Procedia - Social and Behavioral Sciences, 195, 2742-2747. doi:
http://dx.doi.org/10.1016/j.sbspro.2015.06.384
Zhang, S., Li, J. F., & Wang, Y. W. (2012). Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions. Journal of Cleaner Production, 32, 81-87. doi:
http://dx.doi.org/10.1016/j.jclepro.2012.03.014

Downloads

Published

2017-03-31

How to Cite

Núñez, D., Núñez, B., Vaca, H., & Ureña, M. (2017). Influence of minimum quantity of lubricant (MQL) on tool life of carbide cutting tools during milling process of steel AISI 1018. Enfoque UTE, 8(2), pp. 44 – 55. https://doi.org/10.29019/enfoqueute.v8n2.157

Issue

Vol. 8 No. 2 (2017)

Section

Miscellaneous

License

The articles and research published by the UTE University are carried out under the Open Access regime in electronic format.  This means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. By submitting an article to any of the scientific journals of the UTE University, the author or authors accept these conditions.

The UTE applies the Creative Commons Attribution (CC-BY) license to articles in its scientific journals. Under this open access license, as an author you agree that anyone may reuse your article in whole or in part for any purpose, free of charge, including commercial purposes. Anyone can copy, distribute or reuse the content as long as the author and original source are correctly cited. This facilitates freedom of reuse and also ensures that content can be extracted without barriers for research needs.

 

This work is licensed under a Creative Commons Attribution 3.0 International (CC BY 3.0).

 

The Enfoque UTE journal guarantees and declares that authors always retain all copyrights and full publishing rights without restrictions [© The Author(s)]. Acknowledgment (BY): Any exploitation of the work is allowed, including a commercial purpose, as well as the creation of derivative works, the distribution of which is also allowed without any restriction.