Agile Architecture Based on ISA-88 for the Design of Execution Control Chart in Distributed Applications using IEC-61499

Authors

  • Fabricio Chicaiza Universidad Técnica de Ambato
  • Carlos A. García Universidad de las Fuerzas Armadas, ESPE
  • Esteban X. Castellanos Universidad de las Fuerzas Armadas, ESPE
  • Carlos Sánchez Universidad Técnica de Ambato
  • César Rosero Universidad Técnica de Ambato
  • Marcelo Garcia Sanchez Basque Country University

DOI:

https://doi.org/10.29019/enfoqueute.v9n1.186

Keywords:

IEC 61499, Diagramas de Control de Ejecución, Industria 4.0, fabricación inteligente

Abstract

Nowadays, industrial automation systems must optimize control techniques and communication integration of their processes, to introduce concepts given by Industry 4.0. To achieve this, it is necessary to introduce new automation standards to achieve agile and intelligent manufacturing systems, this is the reason why the IEC-61499 standard is considered as the main option. In an industrial level, the ISA-88 standard offers a coherent set of rules and terminology for batch digital control and it defines models for this kind of industries. This is why it is necessary to contribute with low cost alternatives to the industry with which it can implement the Industry 4.0 concepts in various control systems. The present working paper proposes the development of Function Blocks (FBs) networks under IEC-61499 standard to integrate distributed control systems with the help of embedded hardware using the ISA-88 standard as a basis for the development of control algorithms and FB’s Execution Control Chart (ECC).

Downloads

Download data is not yet available.

References

Batchkova, I., Popov, G., Karamishev, H., & Stambolov, G. (2013). Dynamic reconfigurability of control systems using IEC 61499 standard. IFAC Proceedings Volumes (IFAC-PapersOnline) (Vol. 15). Sofía, Bulgaria: IFAC. https://doi.org/10.3182/20130606-3-XK-4037.00050
Bosch, P. C., & Lalonde, A. (2016). Process Manufacturing Simulation Using Isa-88 Batch Control.
Campanelli, S., Foglia, P., & Prete, C. A. (2015). An architecture to integrate IEC 61131-3 systems in an IEC 61499 distributed solution. Computers in Industry, 72, 47–67. https://doi.org/10.1016/j.compind.2015.04.002
Cruz Salazar, L. A., & Rojas Alvarado, O. A. (2014). The future of industrial automation and IEC 614993 standard. 2014 3rd International Congress of Engineering Mechatronics and Automation, CIIMA 2014 - Conference Proceedings. Colombia. https://doi.org/10.1109/CIIMA.2014.6983434
Dai, W., Dubinin, V. N., & Vyatkin, V. (2014). Migration from PLC to IEC 61499 using semantic web technologies. Systems, Man, and Cybernetics: Systems, IEEE Transactions on, 44(3), 277–291. https://doi.org/10.1109/TSMCC.2013.2264671
De Sousa, M. (2010). Analyzing the Compatibility Between ISA 88 and IEC 61499.
Dimitrova, D., Panjaitan, S., Batchkova, I., & Frey, G. (2008). IEC 61499 Component Based Approach for Batch Control Systems. IFAC Proceedings Volumes, 41(2), 10875–10880. https://doi.org/10.3182/20080706-5-KR-1001.01842
Galleguillos, R., Altamirano, S., Garcia, M. V., Pérez, F., & Marcos, M. (2017). Low cost CPPs for industrial control under FAHP algorithm. In 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (pp. 1–4). IEEE. https://doi.org/10.1109/ETFA.2017.8247775
Hanssen, D. H. (2015). Programmable Logic Controllers. A Practical Approach To IEC 61131-3 Using Codesys. Chichester, United Kingdom: John Wiley & Sons, Ltd.
International Society of Automation. (1995). ANSI/ISA-88.01-1995, Batch Control, Part 1: Models and Terminology. American National Standar. North Carolina: The Instrumentation, Systems, and Automation Society.
International Society of Automation. (2001). ANSI/ISA–88.00.02–2001, Batch Control Part 2 : Data Structures and Guidelines for Languages. North Carolina: The Instrumentation, Systems, and Automation Society.
Ivanova, D., Batchkova, I., Panjaitan, S., Wagner, F., & Frey, G. (2009). Combining IEC 61499 and ISA S88 for batch control. IFAC Proceedings Volumes (IFAC-PapersOnline), 13(PART 1), 187–192. https://doi.org/10.3182/20090603-3-RU-2001.0189
Lednicki, L., & Carlson, J. (2014). A framework for generation of inter-node communication in component-based distributed embedded systems. 19th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2014. https://doi.org/10.1109/ETFA.2014.7005222
Lepuschitz, W., & Zoitl, A. (2016). Toward Batch Process Domain with IEC 61499. In A. Zoitl & T. Strasser (Eds.), Distributed control applications: guidelines, design patterns, and application examples with the IEC 61499 (pp. 443–461). FL, USA: CRC Press.
Lu, Y., Morris, K., & Frechette, S. (2016). Current Standards Landscape for Smart Manufacturing Systems. National Institute of Standards and Technology, NISTIR, 8107, 39. https://doi.org/10.6028/NIST.IR.8107
Melik-Merkumians, M., Baier, T., Steinegger, M., Lepuschitz, W., Hegny, I., & Zoitl, A. (2012). Towards OPC UA as portable SOA middleware between control software and external added value applications. IEEE International Conference on Emerging Technologies and Factory Automation, ETFA. Vienna, Austria. https://doi.org/10.1109/ETFA.2012.6489640
Melik-Merkumians, M., Baierling, M., & Schitter, G. (2016). A service-oriented domain specific language programming approach for batch processes. 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA), 1–9. https://doi.org/10.1109/ETFA.2016.7733729
Scholten, B. (2007). Integrating ISA-88 and ISA-95. In ISA EXPO 2007 (p. 13). Houston, Texas: ISA - International Society of Automation.
Strasser, T., & Zoitl, A. (2016). Basic Principles of IEC 61499 Reference Model. In A. Zoitl & T. Strasser (Eds.), Distributed control applications: guidelines, design patterns, and application examples with the IEC 61499 (pp. 11–23). FL, USA: CRC Press.
Thramboulidis, K. (2016). Comments on bridging service-oriented architecture and IEC 61499 for flexibility and interoperability. IEEE Transactions on Industrial Informatics, 13(4), 1494–1496. https://doi.org/10.1109/TII.2016.2598699
Van Der Linden, D., Mannaert, H., Kastner, W., Vanderputten, V., Peremans, H., & Verelst, J. (2011). An OPC UA interface for an evolvable ISA88 control module. IEEE International Conference on Emerging Technologies and Factory Automation, ETFA. https://doi.org/10.1109/ETFA.2011.6058978
Vegetti, M., & Henning, G. (2014). ISA-88 formalization. A step towards its integration with the ISA-95 standard. CEUR Workshop Proceedings, 1333.
Yoong, L. H., Roop, P. S., Bhatti, Z. E., & Yen Kuo, M. M. (2015). Model-driven design using IEC 61499: a synchronous approach for embedded and automation systems. Switzerland: Springer International. https://doi.org/10.1007/978-3-319-10521-5_3
Zhang, Y., & Tao, F. (2016). Optimization of Manufacturing Systems Using the Internet of Things. Londres: Academic Press. Retrieved from https://books.google.es/books?id=hkPQDAAAQBAJ&printsec=frontcover&hl=es#v=onepage&q&f=false
Zoitl, A., & Lewis, R. (2014). Modelling Control Systems Using IEC 61499. IET Control Engineering Series 95 (2nd ed.). London: The Institution of Engineering and Technology.
Zoitl, A., & Prähofer, H. (2013). Guidelines and patterns for building hierarchical automation solutions in the IEC 61499 modeling language. IEEE Transactions on Industrial Informatics, 9(4), 2387–2396. https://doi.org/10.1109/TII.2012.2235449

Downloads

Published

2018-03-30

How to Cite

Chicaiza, F., García, C. A., Castellanos, E. X., Sánchez, C., Rosero, C., & Garcia Sanchez, M. (2018). Agile Architecture Based on ISA-88 for the Design of Execution Control Chart in Distributed Applications using IEC-61499. Enfoque UTE, 9(1), pp. 149 – 165. https://doi.org/10.29019/enfoqueute.v9n1.186

Issue

Vol. 9 No. 1 (2018)

Section

Automation and Control, Mechatronics, Electromechanics, Automotive

License

The articles and research published by the UTE University are carried out under the Open Access regime in electronic format.  This means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. By submitting an article to any of the scientific journals of the UTE University, the author or authors accept these conditions.

The UTE applies the Creative Commons Attribution (CC-BY) license to articles in its scientific journals. Under this open access license, as an author you agree that anyone may reuse your article in whole or in part for any purpose, free of charge, including commercial purposes. Anyone can copy, distribute or reuse the content as long as the author and original source are correctly cited. This facilitates freedom of reuse and also ensures that content can be extracted without barriers for research needs.

 

This work is licensed under a Creative Commons Attribution 3.0 International (CC BY 3.0).

 

The Enfoque UTE journal guarantees and declares that authors always retain all copyrights and full publishing rights without restrictions [© The Author(s)]. Acknowledgment (BY): Any exploitation of the work is allowed, including a commercial purpose, as well as the creation of derivative works, the distribution of which is also allowed without any restriction.