Internet of medical things. Measurement of respiratory dynamics using wearable sensors in post-COVID-19 patients.

Authors

DOI:

https://doi.org/10.29019/enfoqueute.972

Keywords:

Respiratory dynamics, respiratory rate (RR), inertial sensors, wireless communication, post-COVID-19 condition

Abstract

Nowadays, the measurement of respiratory dynamics is underrated at clinical setting and in the daily life of a subject, still representing a challenge from a technical and medical point of view. In this article we propose a concept to measure some of its parameters, such as the respiratory rate (RR), using four inertial sensors. Two different experiments were performed to validate the concept. We analyzed the most suitable placement of each sensor to assess those features and studied the reliability of the system to measure abnormal parameters of respiration (tachypnea, bradypnea and breath holding). Finally, we measured post-COVID-19 patients, some of them with breath alterations after more than a year of the diagnosis. Experimental results showed that the proposed system could be potentially used to measure the respiratory dynamics at clinical setting. Moreover, while RR can be easily calculated by any sensor, other parameters need to be measured with a sensor in a particular position.

Downloads

Download data is not yet available.

References

J. Milic-Emili, Applied Physiology in Respiratory Mechanics, ser. Topics in Anaesthesia and Critical Care. Springer Milan, 2013. [Online]. Available: https://books.google.com.ec/books?id=UQFrAAAAMAAJ

A. R. Fekr, M. Janidarmian, K. Radecka, and Z. Zilic, “A Medical Cloud-Based Platform for Respiration Rate Measurement and Hierarchical Classification of Breath Disorders,” Sensors, vol. 14, no. 6, pp. 11 204–11 224, 2014. [Online]. Available: https://www.mdpi.com/1424-8220/14/6/11204

——, “Respiration Disorders Classification With Informative Features for m-Health Applications.” IEEE journal of biomedical and health informatics, vol. 20, no. 3, pp. 733–747, may 2016. [Online]. Available: https://pubmed.ncbi.nlm.nih.gov/26208371/

A. Nicolò, C. Massaroni, E. Schena, and M. Sacchetti, “The Importance of Respiratory Rate Monitoring: From Healthcare to Sport and Exercise.” Sensors (Basel, Switzerland), vol. 20, no. 21, nov 2020. [Online]. Avail- able: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7665156/#:$sim$:text=Respiratoryrateisafundamental,%2Candexercise-inducedfatigue.

H. Aly and M. Youssef, “Zephyr: Ubiquitous accurate multi-sensor fusion-based respiratory rate estimation using smartphones,” in IEEE INFOCOM 2016 - The 35th Annual IEEE International Conference on Computer Communications, 2016, pp. 1–9. [Online]. Available: https://ieeexplore.ieee.org/abstract/document/7524401

S. Rolfe, “The importance of respiratory rate monitoring,” British Journal of Nursing, vol. 28, no. 8, pp. 504–508, 2019. [Online]. Available: https://doi.org/10.12968/bjon.2019.28.8.504

M. A. Cretikos, R. Bellomo, K. Hillman, J. Chen, S. Finfer, and Flabouris, “Respiratory rate: the neglected vital sign.” The Medical journal of Australia, vol. 188, no. 11, pp. 657–659, jun 2008. [Online]. Available: https://pubmed.ncbi.nlm.nih.gov/18513176/

C. Massaroni, A. Nicolò, D. Lo Presti, M. Sacchetti, S. Silvestri, and E. Schena, “Contact-Based Methods for Measuring Respiratory Rate,” Sensors, vol. 19, no. 4, 2019. [Online]. Available: https://www.mdpi.com/1424-8220/19/4/908

A. Cesareo, Y. Previtali, E. Biffi, and A. Aliverti, “Assessment of Breathing Parameters Using an Inertial Measurement Unit (IMU)- Based System,” Sensors, vol. 19, no. 1, 2019. [Online]. Available: https://www.mdpi.com/1424-8220/19/1/88

S. P. Preejith, A. Jeelani, P. Maniyar, J. Joseph, and M. Sivaprakasam, “Accelerometer based system for continuous respiratory rate monitoring,” in 2017 IEEE International Symposium on Medical Measurements and Applications (MeMeA), 2017, pp. 171–176. [Online]. Available: https://ieeexplore.ieee.org/document/7985870

K. Arthittayapiwat, P. Pirompol, and P. Samanpiboon, “Chest expansion measurement in 3-dimension by using accelerometers,” Engineering Journal, vol. 23, no. 2, pp. 71–84, 2019. [Online]. Available: https://engj.org/index.php/ej/article/view/2846

T. Reinvuo, M. Hannula, H. Sorvoja, E. Alasaarela, and R. Myllyla¨, “Measurement of respiratory rate with high-resolution accelerometer and EMFit pressure sensor,” in Proceedings of the 2006 IEEE Sensors Applications Symposium, 2006, pp. 192–195. [Online]. Available: https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=1634270

P. D. Hung, S. Bonnet, R. Guillemaud, E. Castelli, and P. T. N. Yen, “Estimation of respiratory waveform using an accelerometer,” in 2008 5th IEEE International Symposium on Biomedical Imaging: From Nano to Macro, 2008, pp. 1493–1496. [Online]. Available: https://ieeexplore.ieee.org/document/4541291

C.-C. Huang, W.-Y. Lin, and M.-Y. Lee, “Development and verification of an accelerometer-based respiratory detection algorithm with wearable instrumented smart clothes,” in 2017 IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2017, pp. 578–581. [Online]. Available: https://ieeexplore.ieee.org/document/8122668

S. Kano and H. Mekaru, “Respiratory and Cardiac Signal From Accelerometer Gently Contacting on Torso,” in 2020 IEEE International Symposium on Inertial Sensors and Systems (INERTIAL), 2020, pp. 1–2. [Online]. Available: https://ieeexplore.ieee.org/document/9090066

H. Gollee and W. Chen, “Real-time detection of respiratory activity using an inertial measurement unit.” Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual International Conference, vol. 2007, pp. 2230–2233, 2007. [Online]. Available: https://pubmed.ncbi.nlm.nih.gov/18002434/

A. Bates, M. J. Ling, J. Mann, and D. K. Arvind, “Respiratory Rate and Flow Waveform Estimation from Tri-axial Accelerometer Data,” in 2010 International Conference on Body Sensor Networks, 2010, pp. 144–150. [Online]. Available: https://ieeexplore.ieee.org/document/5504743

A. R. Fekr, K. Radecka, and Z. Zilic, “Design and Evaluation of an Intelligent Remote Tidal Volume Variability Monitoring System in E-Health Applications.” IEEE journal of biomedical and health informatics, vol. 19, no. 5, pp. 1532–1548, sep 2015. [Online]. Available: https://pubmed.ncbi.nlm.nih.gov/26087508/

T. Elfaramawy, C. Latyr Fall, M. Morissette, F. Lellouche, and B. Gosselin, “Wireless respiratory monitoring and coughing detection using a wearable patch sensor network,” in 2017 15th IEEE International New Circuits and Systems Conference (NEWCAS), 2017, pp. 197–200. [Online]. Available: https://ieeexplore.ieee.org/document/8010139

T. Elfaramawy, C. L. Fall, S. Arab, M. Morissette, F. Lellouche, and B. Gosselin, “A Wireless Respiratory Monitoring System Using a Wearable Patch Sensor Network,” IEEE Sensors Journal, vol. 19, no. 2, pp. 650–657, 2019. [Online]. Available: https://ieeexplore.ieee.org/document/8502791

J.-W. Yoon, Y. S. Noh, Y.-S. Kwon, W.-K. Kim, and H. Yoon, “Improvement of Dynamic Respiration Monitoring Through Sensor Fusion of Accelerometer and Gyro-sensor,” Journal of Electrical Engineering and Technology, vol. 9, 2014. [Online]. Available: https://www.semanticscholar.org/paper/Improvement-of-Dynamic-Respiration-Monitoring-of-Yoon-Noh/4b031393a552ee87959a561b002d89e1e2568004

A. Cesareo, S. Gandolfi, I. Pini, E. Biffi, G. Reni, and A. Aliverti, “A novel, low cost, wearable contact-based device for breathing frequency monitoring.” Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual International Conference, vol. 2017, pp. 2402–2405, jul 2017. [Online]. Available: https://pubmed.ncbi.nlm.nih.gov/29060382/

S. Beck, B. Laufer, S. Krueger-Ziolek, and K. Moeller, “Measurement of respiratory rate with inertial measurement units,” Current Directions in Biomedical Engineering, vol. 6, no. 3, pp. 237–240, 2020. [Online]. Available: https://www.degruyter.com/document/doi/10.1515/cdbme-2020-3060/html

J. Skoric, Y. D’Mello, E. Aboulezz, S. Hakim, N. Clairmonte, M. Lortie, and D. V. Plant, “Relationship of the Respiration Waveform to a Chest Worn Inertial Sensor,” in 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 2020, pp. 2732–2735. [Online]. Available: https://ieeexplore.ieee.org/document/9176245

A. Jin, B. Yin, G. Morren, H. Duric, and R. M. Aarts, “Performance evaluation of a tri-axial accelerometry-based respiration monitoring for ambient assisted living.” Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual International Conference, vol. 2009, pp. 5677–5680, 2009. [Online]. Available: https://pubmed.ncbi.nlm.nih.gov/19964139/

S. Madgwick, “An efficient orientation filter for inertial and inertial / magnetic sensor arrays,” 2010. [Online]. Available: https://www.samba.org/tridge/UAV/madgwick_internal_report.pdf

D. Cucinotta and M. Vanelli, “WHO Declares COVID-19 a Pandemic.” Acta bio-medica : Atenei Parmensis, vol. 91, no. 1, pp. 157–160, mar 2020. [Online]. Available: https://pubmed.ncbi.nlm.nih.gov/32191675/

J. Badawy, O. K. Nguyen, C. Clark, E. A. Halm, and A. N. Makam, “Is everyone really breathing 20 times a minute? Assessing epidemiology and variation in recorded respiratory rate in hospitalised adults,” BMJ Quality & Safety, vol. 26, no. 10, pp. 832–836, 2017. [Online]. Available: https://qualitysafety.bmj.com/content/26/10/832

Downloads

Published

2023-07-01

How to Cite

García Cena, C. E., Silva, L., Diaz Palencia, F. H., Moríñigo, M. I., Santos, C. P., Saltarén Pazmiño, R., … Gómez-Andrés, D. (2023). Internet of medical things. Measurement of respiratory dynamics using wearable sensors in post-COVID-19 patients. Enfoque UTE, 14(3), pp. 36–48. https://doi.org/10.29019/enfoqueute.972

Issue

Vol. 14 No. 3 (2023)

Section

Miscellaneous

License

Copyright (c) 2023 The Authors

Creative Commons License

This work is licensed under a Creative Commons Attribution 3.0 Unported License.

The articles and research published by the UTE University are carried out under the Open Access regime in electronic format.  This means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles, or use them for any other lawful purpose, without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. By submitting an article to any of the scientific journals of the UTE University, the author or authors accept these conditions.

The UTE applies the Creative Commons Attribution (CC-BY) license to articles in its scientific journals. Under this open access license, as an author you agree that anyone may reuse your article in whole or in part for any purpose, free of charge, including commercial purposes. Anyone can copy, distribute or reuse the content as long as the author and original source are correctly cited. This facilitates freedom of reuse and also ensures that content can be extracted without barriers for research needs.

 

This work is licensed under a Creative Commons Attribution 3.0 International (CC BY 3.0).

 

The Enfoque UTE journal guarantees and declares that authors always retain all copyrights and full publishing rights without restrictions [© The Author(s)]. Acknowledgment (BY): Any exploitation of the work is allowed, including a commercial purpose, as well as the creation of derivative works, the distribution of which is also allowed without any restriction.