Manufacture material characteristic analysis of original and alternative auto parts. Case Study: Brake Disc

Authors

DOI:

https://doi.org/10.29019/enfoqueute.v11n3.631

Keywords:

SAE J341, auto parts, carbon equivalent, perlitic matrix

Abstract

All powered vehicles have a braking system adopted according to the type of vehicle and work for which they are designed. In Ecuador, there is a great variety of auto parts that are proposed as alternative replacement, varying in cost and quality. This research aims to quantitatively analyze the characteristics of the brake disc material between original and alternate auto parts. This research analyzes three brake disc samples (A, B, C) from different manufacturing sources, using the ASTM E415-08 spectrometry test and the metallography test under the ASTM A247-16A standard. The spectrometry detects 15 elements in each sample, the carbon equivalent of sample A is 18% and 20% higher in relation to sample B and C, which significantly influences the microstructure. The metallographic tests indicate a pearlitic matrix in each sample, however, there is a different distribution and size of the graphite flakes. According to the SAE J431 standard, each auto part meets the material conditions for the brake disc function.

Metrics

Downloads

Download data is not yet available.

References

Askeland, D. R. y Wright, W. J. (2017). Ciencia e ingeniería de materiales. México:

Cengage.

Belhocine, A. y Bouchetara, M. (2012). Thermal Behavior of Full and Ventilated Disc Brakes of Vehicles. Journal of Mechanical Science and Technology 26(11): 3643–3652. https://doi.org/10.1007/s12206-012-0840-6

Bosch. (2015). Manual de la técnica del automóvil. Alemania.

Cañibano, E.; González, M. y del Amo, O. (2005). Diseño de discos de freno desde un punto de vista multidisciplinar. DYNA, 80(3), 27-32.

Chérrez-Troya, M.; Martínez-Gómez, J.; Peralta-Zurita, D.y Antonio Llanes-Cedeño, E. (2018). Métodos multicriterio aplicados en la selección de un material para discos de freno. Ingenius. Revista de Ciencia y Tecnología, (20), 83-95.

Hwang, P. & Wu, X. (2010). Investigation of Temperature and Thermal Stress in Ventilated Disc Brake Based on 3d Thermo-Mechanical Coupling Model. Journal of Mechanical Science and Technology, Vol. 24, No. 1, 81–84. doi: 10.1007/s12206-009-1116-7.

Rodríguez García, N. J. y Nieto Sánchez, I. C. (2017). Consideraciones para el diseño de un sistema diagnóstico de frenos de disco en un vehículo particular. Avances: Investigación en Ingeniería, 14(1), 76-94.

Gutierrez, N., & Vinueza Lozada, A. (2018). Analysis by the finite element method of the behavior of the ABS brake pads with materials based on steel and zinc discretizing the continuous element using CAE software. Enfoque UTE, 9(1), pp. 188 - 203. https://doi.org/https://doi.org/10.29019/enfoqueute.v9n1.259

Kharate, N. & Chaudhari, S (2018). Effect of material properties on disc brake squeal and performance using FEM and EMA approach. Materials Today: Proceedings, vol. 5, no. 2, 4986–4994. doi: https://doi.org/10.1016/j.matpr.2017.12.076.

Lascano Piedra, D. A. (2017). Análisis de los discos de freno de un Chevrolet Aveo cuando está sometido a diversas temperaturas para determinar el cambio de propiedades del mismo (Bachelor's thesis). Ingeniería Automotriz

Maleque, M. Dyuti, S. & Rahman, M. M. (2010). Material selection method in design of automotive brake disc. Proceedings of the World Congress on Engineering 2010 Vol III, 06.

Paredes Salinas, J., Pérez Salinas, C., & Castro Miniguano, C. (2017). Analysis of the mechanical properties of the composite of polyester matrix reinforced with glass fiber 375 and cabuya applied to the automotive industry. Enfoque UTE, 8(3), pp. 1 - 15. https://doi.org/https://doi.org/10.29019/enfoqueute.v8n3.163.

Piña, M. (2008). Estudio de la influencia de la morfología grafítica sobre las propiedades mecánicas de los discos de freno automotrices de hierro gris hipereutecticos. Mexico D.F.: Instituto Politecnico Nacional.

Rodrigues, J. (2004). Diseño y fabricación de hierros grises hipereutécticos de baja aleación para discos de freno. México D.F.: instituto Politécnico Nacional.

SAE Internacional (2018). SAE J431: Automotive Gray Iron Castings.USA.

SENAE. Servicio Nacional de Aduana del Ecuador. [Online]. Available: https://goo.gl/X4Jk9k

Tuckart, W., Molinari, E., Caso, l., & Prieto, G. (2014). Estudio de falla prematura de disco de freno. Universidad Santiago de Chile.

Published

2020-07-01

How to Cite

Antamba, J., Azanza, V., Reyes, G., Remache, Álvaro, & Ruiz, S. (2020). Manufacture material characteristic analysis of original and alternative auto parts. Case Study: Brake Disc. Enfoque UTE, 11(3), pp. 102 - 110. https://doi.org/10.29019/enfoqueute.v11n3.631

Issue

Vol. 11 No. 3 (2020)

Section

Miscellaneous

Copyright (c) 2020 Enfoque UTE

Creative Commons License

This work is licensed under a Creative Commons Attribution 3.0 International License.

The articles and research published by the UTE University are carried out under the Open Access regime in electronic format. By submitting an article to any of the scientific journals of the UTE University, the author or authors accept these conditions.

The UTE applies the Creative Commons Attribution (CC-BY) license to articles in its scientific journals. Under this open access license, as an author you agree that anyone may reuse your article in whole or in part for any purpose, free of charge, including commercial purposes. Anyone can copy, distribute or reuse the content as long as the author and original source are correctly cited. This facilitates freedom of reuse and also ensures that content can be extracted without barriers for research needs.

 

This work is licensed under a Creative Commons Attribution 3.0 International (CC BY 3.0).

 

In addition, the journal Enfoque UTE guarantees and declares that authors always retain all copyrights to the original published works without restrictions [© The Author(s)]. Acknowledgment (BY): Any exploitation of the work is allowed, including a commercial purpose, as well as the creation of derivative works, the distribution of which is also allowed without any restriction.